Dallas Roofing Pro

Posts Tagged ‘Nice Thing’

Flat roofs are completely different from sloped roofs. Water can run down sloped roofs and go down to the drain. But that isn’t the case on flat roofs. The entire flat roof must have a layer of watertight seal so that water can’t come thru the roof and cause leaks in the house. But like the sloped roof, flat roofs can get damaged and so need roof repair. It’s a nice thing that you can do roof correct on flat roofs, as long as you know the way to. How does one do it? Here’s how.

The first thing you should do is to prepare the things you’ll need for the roof repair. Get a mallet, roofing nails, putty knife, application knife, brooms and roofing cement. These are all the materials wanted to correct your flat roof.

To start roof repair go to your roof and locate the issues. If you found peeled regions or splinters on it, then do the following steps : get rid of the dust and mud on the roof using the brush. Roofing cement cannot stick on surfaces with mud, that’s the reason why you want to make sure the complete area is clean. Now cut a shape on to the area where the fracture or peel was found. If there are multiple splinters or peels, use the same shapes for uniformity. Use the cut shape to make a pattern on the replacement shingles. The size and shape that you create on the replacement shingle should be correct. If you made a mistake on the size, create multiple replacement shingles so the shingles can be on the same level as the area on it. Make another replacement shingle. This one must be at least two inches larger than the other shingles.

Put the putty knife in the area of the edges. Put roofing cement under the edges. Now, attach the shingle on the hole and nail it down. Cement the shingle. If you are going to use multiple shingles to level the area, the other shingles must not be cemented. Just hammer it down with nails. Tack down the larger replacement shingle on the area and put roofing cement on its edges for the seal.

If there are split shingles on your flat roof, then you need to do a different system. First, chop the shingle into two. Open the slashed area and put roofing cement on it. Use roofing nails to tack down the sides of the shingle. Add a replacement shingle using a similar method as described on the correcting of cracked areas.
Roof correct for your flat roof should now be done. You are now defended from water leaks in the in the meantime. Take a look at your roof constantly to maintain it and prevent anymore leaks.